 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN927E PNP/NPN Epitaxial Planar Silicon Darlington Transistors 2SB885/2SD1195 Driver Applications Applications * Motor drivers, printer hammer drivers, relay drivers, voltage regulator control. Package Dimensions unit:mm 2010C [2SB885/2SD1195] 10.2 3.6 5.1 4.5 1.3 Features * High DC current gain. * High current capacity and wide ASO. * Low saturation voltage. 18.0 2.7 5.6 1.2 0.8 14.0 15.1 6.3 0.4 1 2 3 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Tc=25C 2.55 2.55 Conditions 2.7 ( ) : 2SB885 1 : Base 2 : Collector 3 : Emitter SANYO : TO-220AB Ratings (-)110 (-)100 (-)6 (-)5 (-)8 1.75 35 150 -55 to +150 Unit V V V A A W W C C Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol ICBO IEBO hFE fT VCE(sat) VBE(sat) VCB=(-)80V, IE=0 VEB=(-)5V, IC=0 VCE=(-)3V, IC=(-)2.5A VCE=(-)5V, IC=(-)2.5A IC=(-)2.5A, IB=(-)5mA IC=(-)2.5A, IB=(-)5mA 1500 4000 20 0.9 (-1.0) (-)2.0 (-)1.5 MHz V V V Conditions Ratings min typ max (-)0.1 (-)3.0 Unit mA mA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1002AS (KT)/91098HA (KT)/10996TS (KOTO) 8-4330/D251MH/4027KI/D152KI, TS No.927-1/4 2SB885/2SD1195 Continued from preceding page. Parameter Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol V(BR)CBO IC=(-)5mA, IE=0 V(BR)CEO IC=(-)50mA, RBE= ton tstg tf See specified Test Circuit See specified Test Circuit See specified Test Circuit Conditions Ratings min (-)110 (-)100 (0.7) 0.6 (1.3) 4.8 (1.5) 1.6 typ max Unit V V s s s s s s Switching Time Test Circuit PW=50s, Duty Cycle1% 500IB1= --500IB2=IC=2A TUT INPUT RB VR 50 RL 25 Electrical Connection C OUTPUT C B 6k 200 B 6k 200 2SB885 E 2SD1195 E + 100F VBE= --5V + 470F VCC=50V (For PNP, the polarity is reversed.) --10 IC -- VCE From top --50mA --45mA --40mA --35mA --30mA --25mA --20mA --15mA 2SB885 10 IC -- VCE From top 10mA 9mA 8mA 7mA 6mA 5mA 2SD1195 4mA 3mA Collector Current, IC - A --10mA --5mA Collector Current, IC - A --8 8 2mA 1mA --6 6 --4 4 --2 2 0 0 --1 --2 --3 IB=0 --4 --5 ITR08593 0 0 1 2 3 IB=0 4 5 ITR08594 Collector-to-Emitter Voltage, VCE - V --8 Collector-to-Emitter Voltage, VCE - V 8 IC -- VCE From top --5.0mA --4.5mA --4.0mA --3.5mA --3.0mA --2.5mA --2.0mA --1.5mA --1.0mA IC -- VCE From top 1000A 900A 800A 700A 600A 500A 2SD1195 2SB885 Collector Current, IC - A --6 Collector Current, IC - A 6 --4 4 --2 --0.5mA 2 400A 300A 200A 0 0 --1 --2 --3 IB=0 --4 --5 ITR08595 0 0 2 4 6 IB=0 8 10 ITR08596 Collector-to-Emitter Voltage, VCE - V Collector-to-Emitter Voltage, VCE - V No.927-2/4 2SB885/2SD1195 --5 IC -- VBE 2SB885 VCE= --3V Collector Current, IC - A 5 IC -- VBE 2SD1195 VCE=3V --4 4 Collector Current, IC - A --3 0C 3 Ta=1 20C Ta=1 2 25C --40C 25C 1.2 1.6 --2 2 --1 1 0 --0.4 --0.8 --1.2 --1.6 --2.0 --2.4 ITR08597 0 0.4 0.8 --40C 2.0 2.4 ITR08598 Base-to-Emitter Voltage, VBE - V 2 10000 7 5 Base-to-Emitter Voltage, VBE - V 2 hFE -- IC 20 hFE -- IC Ta 0 =12 C 2SD1195 VCE=3V 2SB885 VCE= --3V C 10000 7 5 DC Current Gain, hFE DC Current Gain, hFE 1 Ta= 3 2 1000 7 5 3 2 100 7 5 --0.1 25 C 3 2 1000 7 5 3 2 100 7 5 0.1 25 C C --40 C --40 2 3 5 7 --1.0 2 3 5 Collector Current, IC - A --10 7 --10 ITR08599 7 2 3 5 7 1.0 2 3 5 Collector Current, IC - A 10 7 7 10 ITR08600 VCE(sat) -- IC 2SB885 IC / IB=500 Collector-to-Emitter Saturation Voltage, VCE (sat) - V VCE(sat) -- IC 2SD1195 IC / IB=500 Collector-to-Emitter Saturation Voltage, VCE (sat) - V 5 5 3 2 3 2 --1.0 25C 7 5 3 --0.1 Ta= --40C 1.0 Ta= --40C 25C 7 5 3 0.1 120C 120C 2 3 5 7 --1.0 2 3 5 Collector Current, IC - A --10 7 --10 ITR08601 7 2 3 5 7 1.0 2 3 5 Collector Current, IC - A 10 7 10 ITR08602 VBE(sat) -- IC 2SB885 IC / IB=500 Base-to-Emitter Saturation Voltage, VBE (sat) - V VBE(sat) -- IC 2SD1195 IC / IB=500 7 5 Base-to-Emitter Saturation Voltage, VBE (sat) - V 5 3 3 2 Ta= --40C 25C 2 Ta= --40C 25C 120C --1.0 7 5 --0.1 120C 1.0 7 5 0.1 2 3 5 7 --1.0 2 3 5 Collector Current, IC - A --10 ITR08603 7 2 3 5 7 1.0 2 3 5 Collector Current, IC - A 7 10 ITR08604 No.927-3/4 2SB885/2SD1195 2 --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 2 ASO 2SB885 ICP=-8A Collector Current, IC - A IC=-5A 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 3 5 7 2 --100 ITR08605 2 ASO 2SD1195 ICP=8A IC=5A s 1m s n m 10 0ms atio r 10 ope C D Collector Current, IC - A Tc=25C 1ms to 100ms : single pulse 3 5 7 ms 10 s 1m 10 0m s DC --10 2 Collector-to-Emitter Voltage, VCE - V 40 35 PC -- Tc 2SD885 / 2SD1195 op er ati on Tc=25C 1ms to 100ms : single pulse 3 5 7 Collector-to-Emitter Voltage, VCE - V 10 2 3 5 7 2 100 ITR08606 Collector Dissipation, PC - W 30 25 20 15 10 5 0 0 20 40 Case Temperature, Tc - C 60 80 100 120 140 160 ITR08607 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2002. Specifications and information herein are subject to change without notice. PS No.927-4/4 |
Price & Availability of 2SD1195
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |